• Välkommen till ett uppdaterat Klocksnack.se

    Efter ett digert arbete är nu den största uppdateringen av Klocksnack.se någonsin klar att se dagens ljus.
    Forumet kommer nu bli ännu snabbare, mer lättanvänt och framför allt fyllt med nya funktioner.

    Vi har skapat en tråd på diskussionsdelen för feedback och tekniska frågeställningar.

    Tack för att ni är med och skapar Skandinaviens bästa klockforum!

    /Hook & Leben

Swedish-english Longcase-Clock

Comtoise

Basic
Hello and good afternoon,

I am from germany and I hope to get some information about my old grandfather-clock (see photos). I bought it from an old man in Germany who didn't know anything about it's history. Since then I repaired the movement (i.e. new anchor, see the experimental model in plastic last photo) and refurbished the case and it looks and works fine. The case is made from oak with some inlays of mahogany and maple wood, the back and some interior planks are made from pinewood, the material thicknesses and the weight are slight. I am sure that the case was produced in England, probably around 1750. But the movement doen't correspond to the origin of the case. It is not designed like the english movements of that time. The dial plate is signed „Johan Almgren“ (see Photos) opus number 81. I have found in the internet a clockmaker named Johan Almgren who lived from 1733 to 1778 in Örebro, Sweden. In my view the dial plate and the movement belong together, all holes, screws, bolts fit at best. My questions now are: Is it possible that the movement and the dial plate are swedish? And is it possible that it is from 1766, as the round medallion indicates? And that it was „married“ in Sweden with an imported english case at that time? And is it possible that the mentioned person Olof Olofson in Aby was the first owner of the Clock and that he bought it or it was given to him in 1766? I would be very happy if you could give me your estimation about my old clock an it's supposable history.

Kind regards from Germany – Thomas Mehner
 

Bilagor

  • Hersteller-1.jpg
    Hersteller-1.jpg
    109.6 KB · Visningar: 4
  • Hersteller.jpg
    Hersteller.jpg
    112.9 KB · Visningar: 4
  • Plakette.jpg
    Plakette.jpg
    120.2 KB · Visningar: 4
  • Gesamt.jpg
    Gesamt.jpg
    138.2 KB · Visningar: 5
  • Innen.jpg
    Innen.jpg
    130.7 KB · Visningar: 4
  • Front-2.jpg
    Front-2.jpg
    135.9 KB · Visningar: 5
  • Front-1.jpg
    Front-1.jpg
    145.4 KB · Visningar: 6
  • Werk-1.jpg
    Werk-1.jpg
    117.2 KB · Visningar: 5
  • Werk7.jpg
    Werk7.jpg
    125.5 KB · Visningar: 3
  • Werk6.jpg
    Werk6.jpg
    169.8 KB · Visningar: 3
  • Werk5.jpg
    Werk5.jpg
    131.8 KB · Visningar: 3
  • Werk4.jpg
    Werk4.jpg
    137 KB · Visningar: 3
  • Werk3.jpg
    Werk3.jpg
    139.5 KB · Visningar: 2
  • Werk2.jpg
    Werk2.jpg
    176.6 KB · Visningar: 2
  • Werk1.jpg
    Werk1.jpg
    142.1 KB · Visningar: 2
  • Hakenanker.jpg
    Hakenanker.jpg
    107.3 KB · Visningar: 2
  • Werk-Anker-2.jpg
    Werk-Anker-2.jpg
    91 KB · Visningar: 3
A litte addendum: The experimental plastic-anchor had proved the construction to be correct, and now an identical new anchor made from steel is finished and inserted in the escapement. I spent more than 6 hours work to produce it by hand and to fit it into place, but now it works, the movement runs great. I am very happy about this.
 

Bilagor

  • Anker neu.jpg
    Anker neu.jpg
    132.4 KB · Visningar: 5
Tillbaka
Topp